APC Smart-UPS SRT10KRMXLI, 10 kVA/10 kW, Online UPS, 230 V/400 V, Rackmount 6U, Network Card, Extended Runtime, Black

The APC Smart-UPS On-Line SRT10KRMXLI delivers 10 kVA/10 kW of clean, uninterrupted power in a 6U rackmount chassis. It supports 230 V and 400 V operation, includes 6 IEC C13 and 4 IEC C19 outputs, and features a hard‑wired input (single or three-phase), embedded network management card (SmartSlot), multifunction LCD, and rail kit. Designed for mission-critical applications requiring maximum uptime and remote management capabilities

APC Smart-UPS SRT 10000VA RM 230V

10/100 BaseT Connection

Connect the device to a network using a 10 or 100 BaseT connection

Battery failure notification

Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Green mode

Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

LCD graphics display

Text and mimic diagrams that display modes of operation, system parameters and alarms.

Smart-UPS On-Line Features & Benefits

Protection

Frequency and voltage regulation

Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Power conditioning

Protects connected loads from surges, spikes, lightning, and other power disturbances.

Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Resettable circuit breaker

Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

Cold-start capable

Provides temporary battery power when the utility power is out.

Generator compatible

Ensures clean, uninterrupted power to protected equipment when generator power is used.

Input power factor correction

Minimizes installation costs by enabling the use of smaller generators and cabling.

Marketing Features

Save time with easy and convenient remote/network accessibility.

Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.

Peace of mind that comes with full equipment compatibility and reliability of a leader

Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.

Low operating and maintenance costs with proven reliability and intelligent battery management.

Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.

Avoids costly power problems by keeping your IT equipment and data protected and available.

Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.

Adaptability

Plug-and-Play external batteries

Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

Flash upgradeable firmware

Install maintenance releases of firmware remotely using FTP.

Rack/Tower convertible

Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Serviceability

Audible alarms

Provides notification of changing utility power and UPS power conditions

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

User-replaceable batteries

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Disconnected battery notification

Warns when a battery is not available to provide backup power.

Predicitive failure notification

Provides early-warning fault analysis ensuring proactive component replacement.

Availability

Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Hot-swappable batteries

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Automatic restart of loads after UPS shutdown

Automatically starts up the connected equipment upon the return of utility power.

Temperature-compensated battery charging

Prolongs battery life by regulating the charge voltage according to battery temperature.

Automatic internal bypass

Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Scalable runtime

Allows additional run time to be quickly added as needed.

Manageability

Serial connectivity

Provides management of the UPS via a serial port.

Network manageable

Provides remote power management of the UPS over the network.

InfraStruXure Manager Compatible

Enables centralized management via the APC InfraStruXure Manager.

SmartSlot

Customize UPS capabilities with management cards.

LED status indicators

Quickly understand unit and power status with visual indicators.